Which cold storage equipments and components should make insulation?

- Sep 17, 2018 -

Refrigeration system insulation.png


For the cold storage,in order to reduce the cold loss and prevent frosting on the surface of the pipeline, some low temperature equipments and pipes need to be kept warm.So what kind of equipments and pipes should be covered with insulation?

 

Equipment and piping that need to be insulated are: 1.Medium and low pressure gas pipes and liquid pipes. 2.Equipments working under the pressure of evaporation. 3.High pressure and supercooling liquid pipes and bleeder tubes. 4.Hot ammonia pipes. 5.Water pipes though the low temperature room. 6.Supplying pipes and returning pipes through the cold room

 

Common insulation materials are: cork, polystyrene foam, polyurethane foam, glass wool, PU panel, PIR panel, Aluminium sheet panel, Stainless steel PU panel and so on. The standard thickness of the insulation layer needs to guarantee does not dew on the outer surface. That is to say the thickness of the insulation layer can insure the temperature of the outer surface of the insulation layer is not lower than the dew point of the local air.

  

 

Yantai Paric International Co.,Ltd

Address: No.59-203,NO.99 Dehui Road,Zhi Chu,Zhifu District,Yantai, Shandong Province ,China

M/P: +8613964503338

E-mail: perryxue@aliyun.com


Related Industry Knowledge

Related Products

  • ALFALAVAL Plate Heat Exchanger
  • Cabero Air Cooler and Condenser
  • Axial Fan Motor
  • Copeland Piston Compressor
  • Duct Spilt Unit
  • Centrifugal Chiller